Lobby Sentinel 2

In short

Sentinel Lobby 2 as you have surely already understood, it is the second addon for the fantastic โ–บLobby Miner, the first online roulette software that allows you to monitor in real time about 20 tables roulette.

To make the most of this program it is therefore necessary to have already purchased the โ–บ manualLobby Miner, however, if you already have text files with spin archives of some roulette tables, you can safely use the program as you prefer, also because in Sentinel Lobby 2 there are some interesting functions that do not exclusively concern the data collected by Lobby Miner.

How Lobby Sentinel works 2

Sentinel Lobby  in practice it hooks the text files recorded in real time by โ–บLobby Miner and elaborates a series of related statistics to the frequency of the single numbers, an important fact that can also help the player to verify the presence or not of a bias of roulette.

I have already written a lot on the topic of biases, read the bot presentation post โ–บ Roulette Bias Sniper to better understand all the concepts on which it is based Sentinel Lobby 2 and how to make the most of it.

The first thing to do once the program is started is to select the tables we want to monitor (it is therefore assumed that โ–บLobby Miner has already been running for some time and is recording the numbers released at the various tables).

In the second panel Roulette Table Hoooker, you must then click on the go buttons on the left and select one or more of the text files it is recording โ–บLobby Miner and located in the folder outputs by Lobby Miner, if in doubt watch the video at โ–บYouTube, everything will certainly be clearer.

As you can see in the image, I have selected only some of the available tables, specifically avoiding tables such as Lightning Roulette, Quantum Roulette, as well as all automatic roulettes, as the outputs of these tables are not always totally random.

Once this simple selection is complete, we can then move on to the third panel Control Room, which is precisely our operations center.

The Control Room

Here we have at our disposal everything we need to understand what is happening, almost in real time, to the various tables selected in the previous panel.

The first thing to do is to click on the button Reload Roulette Tables, in this way they will be loaded into Sentinel Lobby 2 all the files of the various selected tables and in fact you will see that the numbers of the registered spins will also appear (Spins column), while the first column (Roulette #) will only serve to identify the table with a progressive number 01, 02, 03, etc.

Once this simple operation is done, we can therefore analyze the various tables linked in two different ways: either all in sequence, or one at a time manually.

At this point it is necessary to take a proper pause to explain what kind of statistics is analyzed by Sentinel Lobby 2.

The Soft Limit

If it's not your first time visiting ThatsLuck.com, you've probably read something about the Soft Limit in the post dedicated to the Roulette bot โ–บ Roulette Bias Sniper.

If you really want to read up on the subject I suggest you read (or reread) that post, at the moment, in short, we can say that the Soft Limit is nothing but a value that tells us if the numbers of a roulette table are coming out more frequently than normal.

The table included in the program is based on 100 spin tranches each, from 100 to 10.000, each tranche is identified by the white fields, while immediately on the right we find the relative value of the Soft Limit.

For example for a 100 spin tranche the Soft Limit value is 28, for 200 spins it is 39 and so on.

In practice, as the numbers come out, the program adds up the positive value of all the individual numbers (if you want to know more about what the positive value of a number is, you will find everything written โ–บ here ), this sum represents the Positive Value of the whole Table, which is reported in PV column.

When the PV of the entire table exceeds the value of the Soft Limit for the recorded spin tranche, then it means that we are in a "rare" gap, which statistically happens only 5% of the time. We can therefore say that it is on average difficult for a table to exceed the Soft Limit.

At this point 2 things can happen: 

โ–บ the Trend gradually returns towards normality (therefore the PV value falls below the Soft LImit);

โ–บ the trend continues to rise.

If, as in case 2, the trend continues to rise, we let's start aiming.

The operating procedure is therefore quite simple: after starting โ–บLobby Miner let's start Sentinel Lobby 2 (where we have already configured the link to the various tables we want to monitor), at this point, since it may take a long time before a game condition is created, we start theAutominer, indicating first in the field below how many minutes the tables must be checked (I usually insert 1 minute).

Then I enable the options Sound Alert (sound alert) or Email Alert (email alert) and if during the day a table exceeds the Soft Limit (which, as mentioned before, only happens in 5% of cases), I will hear an audible alarm or receive an email.

At this point I can also reduce the program to the taskbar and continue to use the PC normally, if something happens I will surely notice. 

As soon as an alarm goes off (a table has a high frequency of only some numbers), in the PV column the value corresponding to the table potentially biased becomes of Red and at this point the operative part is triggered, that is to say you start betting!

At this point, click on the green button of the FIght column! at the indicated table and the fantastic will open immediately ...


L'Autopilot it is basically a clicker, which points only the numbers of our interest, that is all those who have a single positive value greater than 8.

I preferred to narrow the field only to these numbers for some valid reasons: first of all it is true that the value of the Soft Limit is powered by all positive numbers, therefore also those with a value lower than 8, but on the basis of the now numerous field tests, I have verified that betting all positive numbers means settling on a range of 15-18 units to bet, which in practice is almost equivalent to betting for example on Red or Black.

By doing so, the tax weighs much, much more on the player, in fact the numbers with a PV greater than 8 are on average less than 6, a factor that allows the player to expose themselves less and above all to close the attacks positively even when the value The table's PV falls below that of the Soft Limit.

On the other hand, the concept is quite well known, by betting a normal chance such as Red, the tax makes it impossible to win within a maximum of about 40.000 spins, while speaking of single numbers, even after 200.000 spins it is possible that there are some ( max 1 or 2) still positive.

This is a theory that you can test for yourself by downloading and using the software โ–บ Roulette Bias Sniper, which also includes a random generator suitable for just this type of test.

Aside from that, also keep in mind that a winning trend of a small group of numbers can last up to four days!

So don't worry if for hours and hours there are no signs of life from the tables, it doesn't take much for a trend to start taking shape and lasting from a few hits to a few thousand spins.


Obviously if a trend lasts beyond normal, or if the value of the Soft LImit it even reaches that ofHard Limit (these concepts have already been extensively covered โ–บ here ), then it means that we are in the presence of a 100% biased roulette! 

In this rare and lucky case, I recommend leaving Lobby Sentinel 2 and immediately activating the bot โ–บ Roulette Bias Sniper, certainly more performing on single roulette and with more parameters to set up a profitable attack.

AutoPilot Config

The AutoPilot can be configured in the same way as for other programs ThatsLuck, such as โ–บ Roulette Turbo Clicker, basically just tick the option Spacebar Turbo Config and position the mouse on the various numbers of the game mat to record the X / Y coordinates corresponding to the position of the numbers on the screen.

The same goes for the Trigger point, while to configure the bet Anti Disconnenction we must proceed Manually.

Il Trigger point in practice it is a point of the screen that change colour only when the bets are opened.

On this platform (the same on which Lobby Miner rests), a countdown in seconds appears with each round of betting, where the numbers are large and white in color.

As indicated by the red arrow, I always choose a point in the middle of the number 1.

To enter the coordinates and the color code of the Trigger Point, I simply have to enable the option Spacebar Turbo Config, position me on number 1 when it appears (in a point where the Color Code indicated in the Pixel Info bar รจ ClWhite as in the figure) e press the space once on the keyboard.

If you have already read the posts or downloaded the โ–บ Roulette Turbo Clicker or โ–บ Roulette Bias Sniper, you already know exactly what I'm talking about, otherwise watch the video on the โ–บ channel YouTube which illustrates the simple procedure to perform.

Alerts Setup

Finally, in the last screen we find the configuration parameters of the 2 types of alerts provided in the panel Control Room.

The first and simplest is to select the sound we want to hear when an alarm of the tS value is activated if we have activated the function AutoMiner, or when the betting rounds of the bot have ended.

If you let it on Mute obviously you will not hear anything even if you have activated the sound alarm, so adjust accordingly.

Further down we find the configuration parameters in case we want to receive emails every time an alarm is triggered (obviously to be used if we have activated theAutoMiner).

As parameters you must enter those of your mailbox, which will therefore result both as sender and as recipient alert messages, or you can use a different mailbox that you activated on your own as the sender.

All the configuration parameters of these boxes are stored locally on your PC in the file with the .ini extension that you find inside the program folder, no data is collected or otherwise transmitted externally.

Once all the parameters have been entered, you can test if the configuration is correct by pressing the button Test Service, which will send a short test message from the sender to the destination mailbox. That's it.

Ok, now that's all, have fun and don't forget to subscribe to the Telegram channel if you want to preview all the news on upcoming publications.